Startups / 13 min read / 4 November 2026

Open innovation: what it is, the three types, real examples, and how to take the products to market

Blazon Agency takes corporate innovation from pilot to market. Corporate innovation service

Open innovation is the practice of bringing outside ideas, technology and partners into a company's product development, and sending the company's unused ideas out to others who can take them to market. Henry Chesbrough, who named it in 2003, defines it as "the use of purposive inflows and outflows of knowledge to accelerate internal innovation, and expand the markets for external use of innovation, respectively." It runs in three directions: inbound (outside-in), outbound (inside-out) and coupled, where both flows run through a partnership.

Several of Blazon's 500+ launches since 2016 involved a big company working with outsiders. Xiaomi lent its name to a custom-fit earphone, Absolut Art brought in outside partners to launch a new device, and Pillo Health was later acquired by Stanley Black & Decker.

The pattern across them is consistent. Open innovation programs are good at finding ideas. They are much weaker at the second half of Chesbrough's sentence, the part about markets.

This guide covers what open innovation means, the three types, five documented examples, how to run a program, and how to take the products it produces to market.

What is open innovation: Chesbrough's definition

Chesbrough, then at Harvard Business School, introduced the idea in his 2003 book Open Innovation: The New Imperative for Creating and Profiting from Technology. The definition at the top of this page comes from his 2006 follow-up, Open Innovation: Researching a New Paradigm, and it is the definition still published by the Garwood Center for Corporate Innovation at UC Berkeley's Haas School of Business.

Two words in it do the work. "Purposive" means the flows are deliberate, managed and tied to a goal. A suggestion box is not open innovation.

"Respectively" splits the sentence in two. Inflows speed up the company's own development. Outflows find a market for ideas the company will never use itself.

In 2014 Chesbrough and Marcel Bogers tightened the wording. In Explicating Open Innovation, open innovation became "a distributed innovation process based on purposively managed knowledge flows across organizational boundaries, using pecuniary and non-pecuniary mechanisms in line with the organization's business model."

That last clause is the one a launch team should underline. An idea that does not fit how the company makes money will not reach a customer, however good the technology is.

Open innovation is defined against closed innovation, the older model where a company researches, develops, manufactures and sells everything itself and shelves the ideas it cannot use. Some of Chesbrough's early research studied Xerox's Palo Alto Research Center and the spin-off companies that took its technology to market outside Xerox. Blazon's analysis of why corporate innovation stalls at launch shows the same handover failing inside large companies today.

The three types of open innovation

Most guides list the three types without saying where they come from. Chesbrough framed the inflows and outflows.

The third type, coupled, comes from Oliver Gassmann and Ellen Enkel at the University of St. Gallen, who set out three "core process archetypes" in a 2004 paper.

Their description of coupled is still the cleanest one available: "linking outside-in and inside-out by working in alliances with complementary companies."

Inbound (outside-in). Ideas and technology come into the company. Licensing in, buying startups, sponsoring university research, crowdsourcing, idea challenges and supplier co-development all count. This is what most people mean when they say open innovation.

Outbound (inside-out). Ideas the company will not use go out. That means licensing patents, spin-offs, joint ventures built around unused technology, selling IP, or giving it away to grow a market the company wants to sell into.

Coupled. Both flows at once, inside a partnership. Co-development deals, joint ventures, alliances and co-creation communities where outsiders help design a product that the company builds and sells.

TypeDirectionTypical mechanismsExample belowWhere it breaks at launch
InboundOutside inLicensing in, crowdsourcing, startup partnerships, acquisitionsP&G Connect + Develop, LEGO IdeasThe outside idea arrives in a business unit with no owner
OutboundInside outOut-licensing, spin-offs, open patent commitmentsTesla, ToyotaNobody is paid to build the market the IP is meant to open
CoupledBoth, through a partnerCo-development, joint ventures, co-creation communitiesGE Appliances FirstBuildTwo brands, two approval chains, one launch date

In practice the balance is lopsided. A 2013 survey by Chesbrough and Sabine Brunswicker covered 125 large firms with annual sales above $250 million in the US and Europe. According to the Garwood Center's summary, 78% practiced open innovation and none had abandoned it.

Inbound practices were more common than outbound ones. Crowdsourcing and open innovation intermediary services were rated lowest in importance.

Most large companies run the half of open innovation that brings ideas in. The half that takes ideas out to a market is the half they skip.

Open innovation examples that hold up

The top-ranking lists for this term repeat the same names, usually without a source. These five are documented by the companies themselves.

Procter & Gamble Connect + Develop (inbound). P&G launched Connect + Develop in 2001 with a goal of sourcing half its innovation through outside collaboration, and said in 2010 that it had reached it. Writing in Harvard Business Review in 2006, P&G's Larry Huston and Nabil Sakkab said the model already produced more than 35% of the company's innovations and billions of dollars in revenue.

Their headline case was Pringles Prints, chips printed with pictures and words. They wrote that P&G took it from concept to launch in less than a year, where the old way might have taken two.

The detail people skip is how it is fed. Connect + Develop lists P&G's current needs across products, technology, in-store, ecommerce and the supply chain, and asks outside innovators to submit against them. P&G tells outsiders what it wants to buy.

LEGO Ideas (inbound, crowdsourced). Fans submit set designs and other fans support them. Under LEGO's own rules, an idea that reaches 10,000 supporters is considered for production, and creators receive 1% of the total net sales of the set.

Two details make it work. The royalty is fixed and public before anyone submits, so there is no IP fight at the end.

And 10,000 supporters earns a review, not a production slot. LEGO still decides.

That second detail is the right instinct. A vote costs the voter nothing, and in Blazon's experience free signals like votes and waitlist sign-ups overstate demand. The Deposit Test asks for money instead, because someone who will not leave a small deposit will not pay full price when the product launches.

GE Appliances FirstBuild (coupled). GE Appliances launched FirstBuild in 2014 "as an experiment to see if product innovation could happen faster in the open." Anyone can submit an idea to its co-creation platform, ideas are shared publicly from the start, and the strongest products move into GE Appliances' house of brands.

By August 2024 it reported more than 245,000 cocreators, more than 100 products and features launched, 37 of them graduated to GE Appliances, and an average of six months to reach the market.

The product that proved the model was Opal, a nugget ice maker. GE said in 2015 that it was using Indiegogo "as a selling platform to gauge market acceptance of the product". Opal earned more than $2.7 million there and became the founding product of GE Appliances' relaunched small appliances division.

Tesla's open patents (outbound). On June 12, 2014, Elon Musk announced that the wall of patents in Tesla's Palo Alto lobby had come down. "Tesla will not initiate patent lawsuits against anyone who, in good faith, wants to use our technology," he wrote.

The reasoning was commercial. Electric car programs at the major manufacturers were, in his words, "far less than 1% of their total vehicle sales." Tesla needed a bigger electric car market more than it needed exclusive rights to a small one.

Toyota's electrification patents (outbound with a business model). On April 3, 2019, Toyota said it would grant royalty-free licenses to approximately 23,740 patents covering electric motors, power control units, system controls and related systems, running through the end of 2030.

It paired the free patents with fee-based technical support for other manufacturers building electrified vehicles. That is outbound open innovation with a revenue line attached. The free IP opens the door, and the paid support is where Toyota earns from the companies that walk through it.

How to run open innovation

Chesbrough's 2014 definition ends on the business model for a reason. Every step below exists to give an outside idea a route to revenue.

Start from the market, not the idea pool. Write down the customer problem and the product you would launch if you had the technology, then go looking for it. P&G's model works because it publishes specific needs. An open call for "ideas" produces a pile of ideas and nobody waiting to buy them.

Choose the flow on purpose. Inbound when you own the channel and lack the technology. Outbound when you hold technology you will never use, or need a bigger market to exist before your own product can sell. Coupled when neither side can launch alone.

Settle IP and money before the first workshop. Chesbrough's "pecuniary and non-pecuniary mechanisms" means royalties, fees, equity, credit and access. LEGO publishes its 1% before anyone submits. Programs that negotiate IP after the product works spend months with lawyers while the market moves on.

Name one commercial owner for every product that comes through. A person, with a revenue number against their name. An outside idea that lands in a business unit with no sponsor is not rejected. It is deprioritized, which is slower and harder to argue with.

Set the evidence threshold in money. Agree in advance what the product has to prove before the company commits tooling, inventory and media: a number of paid pre-orders, a deposit conversion rate, a sell-through target. The demand validation ladder lays out each test, in order, from a working prototype to money taken.

Fund the launch at the start. The launch budget has to sit inside the program, not in a request to a business unit's marketing plan. A request has to beat the parent's biggest brands every quarter. A budget line does not.

Decide what success unlocks. A product that works could move into a business unit, be licensed, spin out or be sold. Each route needs a different brand, channel and contract, so pick one before the build is finished, or a working product ends up with no home.

How to take open-innovation products to market

An open innovation product carries problems a normal launch does not. It has two or more owners, two brands, two legal teams and usually no customer list of its own.

This is the work Blazon does for corporate innovation teams launching new products, and five decisions come up every time.

Decide whose name leads. A partner product launched under a famous corporate name gets judged against that company's best work on day one. HelloEar, custom-fit earphones made with Xiaomi's backing, faced exactly that question in a category crowded with famous audio brands. Too much Xiaomi and the product reads as a sub-brand, too little and the partnership earns nothing.

Blazon let the product lead with its own promise, earphones built around the shape of your ears, and kept Xiaomi as the credential underneath. Paid media went after audiophiles, tech enthusiasts and Xiaomi fans. The HelloEar by Xiaomi launch reached $1.2M in revenue at launch.

Prove demand before the partner commits. In a coupled deal each side tends to wait for the other to commit first. Paid pre-orders end the standoff, because both companies can read the same number. FirstBuild did exactly this with Opal, and the product lived at FirstBuild for several years before GE Appliances built a small appliances division around it.

Run it as one launch. Partnerships multiply calendars. Each company has its own PR team, brand guardians and approval chain, and a launch built by committee arrives in pieces.

Hangsmart shows the alternative. The device makes hanging art simple, it came from Absolut Art, Absolut's direct-to-consumer art platform, and its PR involved a second agency, RVD Communications. Blazon held the strategy, the campaign creative and the platform launch, and ran PR jointly with RVD, so the message never split between companies.

The result was 100+ press mentions for the Absolut Art Hangsmart launch, with HYPEBEAST, WIRED and Digital Trends among them. That only works when one team holds the whole product launch, not one piece of it per company.

Own the customer. If the product sells only through the parent's retail partners, nobody on the project learns who bought it or why. A direct-to-consumer store from day one keeps the customer data with the product, and that data decides the second SKU and the next round of internal funding.

Know what you are competing with. Acquiring a startup that has already launched is the priciest form of inbound open innovation, and the one with the least uncertainty left in it.

Pillo Health, later acquired by Stanley Black & Decker, is the version Blazon saw up close. Its home-health robot helps people manage their medication, and the launch Blazon shaped took it to 15K+ units pre-ordered, 120+ press features and $2.5M in sales.

That is the bar. An open innovation product that reaches the investment committee with less evidence than a startup the company could simply buy will lose that meeting.

Who launches an open innovation product

Open innovation teams are staffed to scout, partner and prototype. The launch itself, meaning brand, PR, paid media, commerce and timing, usually belongs to business units with other priorities, or gets split between two partner companies with different calendars.

Blazon's corporate innovation agency work sits in that gap. It works with an innovation lab, an intrapreneur or a partnership team, reporting to whoever sponsors the product. It runs the pre-order and deposit tests, builds the brand and the store, and puts press and paid media behind the launch.

The product then scales, or goes to the business unit with the brand, store, accounts and data in the client's name. For a partner product that is finished and simply needs a market, Blazon's product launch agency team handles everything from positioning to first sales.

What an outside team cannot supply is a mandate. If no one inside either company is allowed to commercialize the product, a stronger launch only delays the moment it gets shelved.

Most large companies opened the front door to outside ideas years ago. The ones that profit from open innovation also built the door that leads to a customer.

Frequently asked questions

What is open innovation in simple terms?

Open innovation means a company does not rely only on its own research and development. It brings in ideas and technology from startups, universities, suppliers and customers, and sends ideas it will not use out to others through licenses, spin-offs or partnerships. The aim is to get better products to market faster than the company could manage alone.

Who coined the term open innovation?

Henry Chesbrough, then at Harvard Business School, in his 2003 book Open Innovation: The New Imperative for Creating and Profiting from Technology. His 2006 definition, "the use of purposive inflows and outflows of knowledge to accelerate internal innovation, and expand the markets for external use of innovation, respectively", is still the most widely quoted.

What are the three types of open innovation?

Inbound (outside-in) brings outside ideas and technology into the company. Outbound (inside-out) sends unused internal ideas out through licensing, spin-offs or open patent commitments. Coupled combines both inside a partnership, and was set out as a core process alongside the other two by Oliver Gassmann and Ellen Enkel in 2004.

What is the difference between open and closed innovation?

Closed innovation keeps every stage inside the company: research, development, manufacturing and sales, with unused ideas shelved. Open innovation assumes useful knowledge also sits outside the company, so it licenses, partners and buys to bring ideas in, and lets unused ideas go to companies that can sell them.

What are some examples of open innovation?

Well-documented examples include P&G's Connect + Develop program, LEGO Ideas, GE Appliances' FirstBuild co-creation community, Tesla's 2014 open patent commitment and Toyota's 2019 royalty-free licensing of about 23,740 electrification patents. The first two are inbound, FirstBuild is coupled, and the last two are outbound.

What is co-creation in open innovation?

Co-creation is a form of coupled open innovation where customers, makers or partners help design a product that the company then builds and sells. GE Appliances' FirstBuild is the clearest case: anyone can submit an idea, ideas are developed in public, and the strongest products move into GE Appliances' brands.

Who owns open innovation in a company?

An innovation, R&D or corporate venturing team usually runs the program. What decides success is whether each product that comes through has one named commercial owner with a revenue target and a launch budget. Where the program has no launch capability of its own, an outside corporate innovation launch team can run the launch for that owner. IP ownership is a separate question, set by contract before partner work starts.

Is open innovation the same as open source?

No. Open source publishes code or designs for anyone to use under a license, which is one way of sharing. Open innovation is the wider strategy of managing paid and unpaid flows of ideas in and out of a company. Tesla's open patent commitment borrowed the open source philosophy, while P&G's Connect + Develop runs on commercial partnerships.

Ready to launch?

Blazon Agency is the world's leading premium product launch agency.

Get Started
Michael Raven

Michael Raven

500+ product launches across Kickstarter, Indiegogo, DTC, and retail. Offices in London and New York.

Let’s build your launch strategy

Let’s Talk

Tell us about your product and where you want to take it.

Let’s Work

New project, new product, new market. Whatever you’re planning, we’d like to hear about it.

Department
Budget (agency fee)
Let’s talk